Categories

System glitches and false alarms can be exasperating, and more importantly, could prevent your security system from working how it should. Thankfully, most problems, from dead batteries to false alarms, are straightforward to correct. Take a look at our tips for troubleshooting your home alarm system in Denver. We’ll help keep your family safe and your system operating the way it should.

Test Your Home Security System In Denver

One great way to troubleshoot your property’s defense is to test it yourself! The latest systems permit you to put them in test mode to keep you from triggering an emergency call. After switching to test mode, take these steps:

• Turn on your system as you would when leaving.
• Open a door or window that uses a contact sensor, or test other sensors. Shut the door or window once you’re finished so it doesn’t prompt the alarm when you turn the system back on.
• Allow the alarm to go off for 60 seconds to ensure communications with the security company and to produce an entry in the alarm activity log.
• Continue testing devices as needed
• Inspect the alarm’s activity log to verify that everything’s working.

Don’t worry, monitoring professionals will be able to see that your system is undergoing a test. Just make sure to turn test mode off when complete. It’s a good idea to test once a month or whenever you make changes to your home’s phone or internet connectivity.

Evaluate The Positioning And State Of Motion Detectors

Although an essential element of your alarm system, motion detectors are notorious for false alarms. Do your part to prevent them with a few basic troubleshooting steps.

• Do a physical inspection. Are there things that could move within the path of the sensor, like drapery blown in a breeze?
• Is the sensor clean? Dirt, cobwebs, and debris can result in malfunctions. Check to confirm the device is clean.
• Does the motion detector have pet immunity you can turn on? Some sensors can be configured to disregard pets weighing as much as 100 pounds.
• When was the battery changed? A nearly depleted battery can impact performance or lead to false alarms.
• Is a heat source impairing the sensor? Too much heat from sunlight or a fireplace can cause an alarm.

Keep Batteries On Hand And Look Out For Low Battery Notifications

One of the great things about modern home security systems is that they’ll notify you when batteries are running low. If your system has a app or control panel, you’ll often find notifications there. Depending on the alarm, you could detect an intermittent beep when batteries are running out. 

Motion detectors, smoke detectors, contact sensors, and other wireless components have batteries that need to be replaced every year or two. It’s best to keep batteries around and create a replacement schedule. Some systems also have a rechargeable backup battery for the central control panel. This battery helps keep your system running if you have a power outage and should recharge itself once the electricity is working again. If it fails to recharge, you should replace it.

Troubleshooting Is Easy With ADT Home Security In Denver 

As the leading name in home security, ADT designs systems that supply unrivaled functionality and protection. Getting into test mode is simple through the ADT+ app or MyADT.com, and you’ll always get alerts when a battery is low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system ideal for your Denver home. Call (720) 465-2917 or complete our form today!